UMTS HS Bi – Directional Amplifier 1Watt

 

MR-HSUMTS70-X

UMTS High Selective Repeater provides a cost effective answer for enhancing radio communication in buildings, basements, parking garages and other RF shielded environments. BDA products are designed to receive and amplify RF signals strength in both the "Down Link" and the "Up Link" communication paths.

Additional technical data:

Electrical
 Down LinkUp Link
Rejection /1 MHz from Pass Band/,min45 dB45dB
Linear Output Power30 dBm12dBm
Range of ALC,min30 dB30 dB

 

Local control & monitoring /RS-232/ - YES

Current & temperature protection - YES

Down RF Power indication - YES

Power Supply - 220V AC

Power Consumption, max - 50 W

 

*Different pass bands are available upon request


MR-HSUMTS70-X
Specifications:
Electrical
Down LinkUp Link
Frequency range 2110 - 2170 MHz 1920 - 1980 MHz
Gain at min. Attenuation, min. 75 dB 72 dB
Output IP3, min. 48 dBm 38 dBm
Range of ALC Output Power Setting Points (up 8) 30-16 dBm ( other available on request) Available on request; Up Link Gain is set 3 dB less than Down Link Gain
Pass Band Ripple +/- 1.5 dB 1.5 dB
Pass Band - Optional 2140-2150 MHz 1950-1960 MHz
Noise Figure, max. 6 dB 4.5 dB
Protection from Oscillation and Overload Automatic
Impedance 50 Ohm 50 Ohm
VSWR In / Out, max. 2 2
Propagation Delay, max. 5 usec 5 usec
Input power, max -15 dBm
Mechanical
Dimensions 440x325x180 mm (17.3"x12.8"x7.1")
Weight Less than 11 kg
Connectors N-Type, Female
Mount Wall/Ceiling
Environmental
Operating Temperature Range -10°C to +50°C
Humidity, min. 95%
Splash, Dust Protected
Service Life >10 years

MARS reserves the right to make technical changes or modifications to any of its products and specifications without prior notice and without implementing such changes to prior supplied products. Product images are representative and indicative only. Warranty terms and general conditions of sale are applicable on any purchase of any product and are available in the “Policies” section.