Squint Band Extra Thin Antenna

 

MA-CB22-13, MA-CB22-23, MA-CB22-33

MARS Squint Beam Extra Thin Antennas are High Gain Planar Arrays with various horizontal Beam squints. The Antenna is flat and thin, thus featuring a very low profile.
Mounted on building walls, the antenna virtually merges with the wall, yet allowing beam pointing to cover any required direction (± 45°). UV protected radome allows for harsh environment installations.

Applications:
- Unobtrusive Long Yagi Replacement
- BDA outdoor (BS) Antenna
- Sector Extension
- Narrow-High Gain sectorial coverage (22°)


MA-CB22-13, MA-CB22-23, MA-CB22-33
Specifications:
Electrical
Model MA-CB22-13 MA-CB22-23 MA-CB22-33
Beam Squint in H-Plane 0 ° 22 ° 45 °
Frequency range 824 - 894 MHz 824 - 894 MHz 824 - 894 MHz
Gain, min. 15 dBi 14.5 dBi 13 dBi
VSWR, max. 1.8:1 1.8:1 1.8:1
3 dB Beam-Width, H-Plane, typ. 22 ° 22 ° 22 °
3 dB Beam-Width, E-Plane, typ. 27 ° 27 ° 31 °
Polarization Linear Vertical
Input power, max 50 Watt
Input Impedance 50 Ohm
Lightning Protection DC Grounded
Mechanical
Dimensions (HxWxD) 808 x 708 x 31 mm (31.8"×27.9"×1.2")
Weight 6.7 kg
Connector N-Type, Female
Back Plane Aluminum; protected through chemical passivation
Radome UV Protected Polycarbonate
Mount Wall Mount / Connector Up or Down for Opposite Squint
Environmental
Operating Temperature Range - 40°C to + 65°C
Vibration According to IEC 60721-3-4
Wind Load 200 km/h (survival)
Flammability UL94
Water Proofing IP-65
Humidity ETS 300 019-1-4, EN 302 085 (annex A.1.1)
Ice and Snow 25mm radial (survival)
Salt Fog According to IEC 68-2-11
Service Life > 10 years

MARS reserves the right to make technical changes or modifications to any of its products and specifications without prior notice and without implementing such changes to prior supplied products. Product images are representative and indicative only. Warranty terms and general conditions of sale are applicable on any purchase of any product and are available in the “Policies” section.