5 GHz Broadband Subscriber Antenna

 

MA-WA58-1X

MARS 5 GHz Broadband High Gain Antenna covers the full 5 GHz spectrum- from lower to higher UNII band-including its unlicensed part.
Additional Features:

- diamond shape provides for highest range of ETSI standards, up to TS5
- light weight and durable construction
- DC grounded for lightning protection to meet local electrical building codes
- antenna has a customized version with an optional enclosure for the customer's OEM radio/CPE


MA-WA58-1X
Specifications:
Electrical
Frequency range 4.9 - 5.875 GHz
Gain,typ. 23 dBi @ 5.15-5.875 , 21 dBi @ 4.9-5.15
VSWR, max. 1.5 : 1@ 5.15-5.875 , 1.9: 1 @ 4.9-5.15
3 dB Beam-Width, H-Plane, typ. 10.5 °
3 dB Beam-Width, E-Plane, typ. 10.5 °
Side Lobes, min. -23 dB
Polarization Linear Vertical
Cross Polarization, min. -24 dB
Front to Back Ratio, min. -30 dB
Input power, max 30 Watt
Input Impedance 50 Ohm
Lightning Protection DC Grounded
Mechanical
Dimensions (HxWxD) 305 x 305 x 15 mm ( 12"x12"x0.6")
Weight 840 gr.
Connector N-Type, Female
Back Plane Aluminum; protected through chemical passivation
Radome UV Protected Polycarbonate
Mount See Ordering Options
Environmental
Operating Temperature Range -40° C to +65° C
Vibration According to IEC 60721-3-4
Wind Load 200 km/h (survival)
Flammability UL94
Water Proofing IP-67
Humidity ETS 300 019-1-4, EN 302 085 (annex. A.1.1)
Ice and Snow 25 mm radial (survival)
Salt Fog According to IEC 68-2-11
Service Life > 10 years
Standard Compliance
4.9-5.15 GHz ETSI EN 302 085 V1.2.3 – TS1, TS2, TS3
5.15 – 5.875 GHz ETSI EN 302 085 V1.2.3 – TS1, TS2, TS3, TS4, TS5

Ordering Options

Antenna Suited For EnclosureMA-WA58-1X BRF
Antenna with integral Pole Mount includes stainless steel bracketsMA-WA58-1X PM
Antenna with mountMA-WA58-1X B
Antenna Suited for MNT-22 (optional wall/pole adjustable mount)MA-WA58-1X MNT

MARS reserves the right to make technical changes or modifications to any of its products and specifications without prior notice and without implementing such changes to prior supplied products. Product images are representative and indicative only. Warranty terms and general conditions of sale are applicable on any purchase of any product and are available in the “Policies” section.