2.3-2.7 GHz Subscriber Antenna & Enclosure

 

MA-WA24-2XBRFC

MARS 2.4 GHz Antenna & Enclosure Solution comprises of:
- Waterproof 2.3-2.7 GHz Broadband Antenna
- Weatherproof Enclosure with provisions for Az/El Mounting device
- Azimuth/Elevation Adjustable Mount MNT-22
This solution enables WISP/Integrator to design his own low cost, weatherized subscriber unit, saving high costs of special antenna-radio integration.


MA-WA24-2XBRFC
Specifications:
Electrical
Frequency range 2.3 - 2.7 GHz
Gain, min. 18 dBi @2.3-2.4, 17@2.4-2.7
VSWR, max. 1.5:1
3 dB Beam-Width, H-Plane, typ. 21 °
3 dB Beam-Width, E-Plane, typ. 20 °
Side Lobes, min. -16 dB
Polarization Linear, Vertical (Horizontal with MNT-22 Option)
Cross Polarization, min. -26 dB
Front to Back Ratio, min. -26 dB
Input power, max 30 Watt
Input Impedance 50 Ohm
Mechanical
Dimensions (HxWxD) 305 x 305 x 30 mm ( 12"x12"x1.2")
Weight 1.3 (with Enclosure) kg
Connector Pig Tail with MCX, Female
Back Plane Aluminum; protected through chemical passivation
Radome UV Protected Polycarbonate
Mount MNT-22
Environmemtal
Operating Temperature Range -40° C to +65° C
Vibration According to IEC 60721-3-4
Wind Load 200 km/h (survival)
Flammability UL94
Water Proofing IP-65
Humidity ETS 300 019-1-4, EN 302 085 (annex. A.1.1)
Ice and Snow 25 mm radial (survival)
Salt Fog According to IEC 68-2-11
Service Life > 10 years
Standard Compliance
ETSI EN 302 085 V1.2.3 – TS1, TS2, TS3

Ordering Options

Antenna with mountMA-WA24-2XBRFC B

MARS reserves the right to make technical changes or modifications to any of its products and specifications without prior notice and without implementing such changes to prior supplied products. Product images are representative and indicative only. Warranty terms and general conditions of sale are applicable on any purchase of any product and are available in the “Policies” section.