3.3-3.8 GHz Dual Polarization/ Dual Slant Subscriber Antenna

 

MA-WA36-DP21

MARS  Broadband Dual Polarized Subscriber Antenna provides a cost effective solution for WiMAX applications. 

Additional Features:

  • dual slant if mounted diagonally
  • stable performance with 22 dBi of gain
  • compact size allowing for easy blending with any environment
  • tilt mount allowing for quick and easy installation
  • UV protected radome suitable for harsh environment installations

     


    • MA-WA36-DP21
      Specifications:
      Electrical
      Frequency range 3.3 - 3.8 GHz
      Gain H-Port & V-Port 22 dBi
      VSWR, max. 1.7:1
      3 dB Beam-Width, H-Plane, typ. 12 °
      3 dB Beam-Width, E-Plane, typ. 12 °
      Side Lobes, min. ETSI TS3
      Polarization Linear, Vertical and Horizontal
      Cross Polarization, min. ETSI TS3
      Port to Port Isolation - 35 dB
      Front to Back Ratio, min. ETSI TS3
      Input power, max 10 Watt
      Input Impedance 50 Ohm
      Lightning Protection DC Grounded
      Mechanical
      Dimensions (HxWxD) 370 x 370 x 40 mm (14.5" x14.5" x1.6")
      Weight 2.1 kg
      Connector 2x SMA, Female or 2x N-Type, Female
      Back Plane Aluminum; protected through chemical passivation
      Radome Plastic UV Protected
      Mount MNT-22
      Environmemtal
      Operating Temperature Range - 55°C to + 65°C
      Vibration According to IEC 60721-3-4
      Wind Load 200 km/h (survival)
      Flammability UL94
      Water Proofing IP-67
      Humidity ETS 300 019-1-4, EN 302 085 (annex A.1.1)
      Ice and Snow 25mm radial (survival)
      Salt Fog According to IEC 68-2-11
      Service Life >10 years

      Ordering Options

      Antenna with 2 x SMA, Female Connector and mountMA-WA36-DP21 B
      Antenna with 2x N-Type, Female Connector suited for MNT-22MA-WA36-DP21 NB
      Antenna with 2xSMA, Female Connector Suited for MNT-22MA-WA36-DP21
      Antenna with 2xN-Type, Female Connector suited for MNT-22MA-WA36-DP21 N

      MARS reserves the right to make technical changes or modifications to any of its products and specifications without prior notice and without implementing such changes to prior supplied products. Product images are representative and indicative only. Warranty terms and general conditions of sale are applicable on any purchase of any product and are available in the “Policies” section.