Products > Antennas > Broadband Access Antennas (LTE,WiFi,WiMAX,802.11) > Subscriber Antennas >

3.3-3.8 GHz Subscriber Antenna

 

MA-WA36-22

MARS 3.5 GHz Antenna suited for the licensed 3.5 GHz band is specially designed for WiMAX applications.
Additional Features:
- aesthetic and unobtrusive profile
- suitable for both indoor and outdoor applications
- can be customized with customer defined back plane and different connector configurations


MA-WA36-22
Specifications:
Electrical
Frequency range 3.3 - 3.8 GHz
Gain,typ. 22 dBi
VSWR, max. 1.7:1
3 dB Beam-Width, H-Plane, typ. 11.5 °
3 dB Beam-Width, E-Plane, typ. 11.5 °
Side Lobes, min. ETSI EN 302 085 v1.2.3 TS3 Range 1
Polarization Linear Vertical
Cross Polarization, max. ETSI EN 302 085 v1.2.3 TS3 Range 1
Front to Back Ratio, max. ETSI EN 302 085 v1.2.3 TS3 Range 1
Input power, max 50 Watt
Input Impedance 50 Ohm
Lightning Protection DC Grounded
Mechanical
Dimensions (HxWxD) 370 x 370 x 30 mm (14.6"x14.6"x1.2")
Weight 3 kg
Connector N-Type, Female
Back Plane Aluminum protected through chemical passivation
Radome UV Protected, Plastic
Mount MNT-22
Environmemtal
Operating Temperature Range - 40°C to + 65°C
Vibration According to IEC 60721-3-4
Wind Load 200 km/h (survival)
Flammability UL94
Water Proofing IP-67
Humidity ETS 300 019-1-4, EN 302 085 (annex A.1.1)
Ice and Snow 25mm radial (survival)
Salt Fog According to IEC 68-2-11
Service Life >10 years
Standard Compliance
ETSI EN 302 085 v1.2.3 TS3 Range 1

Ordering Options
Antenna Suited for MNT-22 (optional wall/pole adjustable mount)MA-WA36-22
Antenna with mountMA-WA36-22 B

MARS reserves the right to make technical changes or modifications to any of its products and specifications without prior notice and without implementing such changes to prior supplied products. Product images are representative and indicative only. Warranty terms and general conditions of sale are applicable on any purchase of any product and are available in the “Policies” section.